Product Features
- Full-Tooth Spindle Design for Superior Machining Performance
- Low-Speed High Torque, High-Speed High Power
- Specially Optimized Base Design to Resist Vibration from Heavy Cutting
- All Full-Teeth Adopt Original Taiwan Brands, with High Precision, Low Wear and Low Noise
Technical Specifications
| Item |
Unit |
VMC-1370HD |
| System |
CNC System |
- |
FANUC |
| Rapid Speed |
mm/min |
20000/20000/12000 |
| Cutting Feed Speed |
mm/min |
1-10000 |
| 3-Axis Rated Power |
Kw |
3.0/3.0/3.0 [Note①] |
| 3-Axis Rated Torque |
N.m |
27.0/27.0/27.0 [Note①] |
| Worktable |
T-Slot Dimensions |
- |
5-18-150 |
| Worktable Dimensions |
mm |
1400×700 |
| Max Worktable Load |
Kg |
1600 |
| Travel |
3-Axis Travel |
mm |
1300×700×700 |
| Distance from Spindle Nose to Worktable |
mm |
120-820 |
| Spindle |
Spindle Power |
Kw |
15-18.5 (Wide Range) |
| Spindle Rated Torque |
N.m |
572(Low Speed Gear)/143(High Speed Gear) |
| Spindle Gear Ratio |
- |
1:4 / 1:1 |
| Max Spindle Speed |
rpm |
2500(1:4) / 8000(1:1) |
| Spindle Taper |
- |
BT50 |
| Transmission |
Screw Diameter/Pitch |
mm |
Φ50D12/Φ50D12/Φ50D12 |
| Linear Rail Brand/Type/Width |
- |
PMI Roller 55mm/Roller 45mm/Rectangular rail [Note②] |
| Number of Rails/Sliders |
Pcs |
2-6/4-8 (Rectangular rail) |
| Tool Magazine |
Tool Magazine Capacity |
Pcs |
24 [Note③] |
| BT/BBT Pull Stud Angle |
° |
45° |
| Max Tool Diameter |
mm |
Φ110(Full Magazine)/Φ210(Empty Adjacent Tool) |
| Max Tool Length/Weight |
mm/kg |
350/15 |
| Tool Change Time |
s |
2.2 |
| Partial Configuration |
Automatic Chip Removal |
- |
Rear Flushing |
| Automatic Lubrication System |
- |
Thin Oil Lubrication |
| Electrical Cabinet Cooling |
- |
Heat Exchanger |
| Accuracy |
Positioning Accuracy (Full Travel) |
mm |
0.008 |
| Repeat Positioning Accuracy (Full Travel) |
mm |
0.005 |
| Others |
Air Supply Flow/Pressure |
- |
Flow 150(L/min)/Pressure(6Bar) |
| Total Power |
Kw |
35 |
| Machine Weight |
Kg |
10500 |
| Machine Overall Dimensions (L×W×H) |
mm |
4900×2950×2900 |
Standard Configuration:
Mechanical manual tool magazine, chain-type chip removal, spindle oil cooler, water gun, air gun, spindle air curtain, spindle ring spray, centralized lubrication, air source treatment, oil-water separation, heat exchanger, nitrogen balance
Optional Configuration:
Mitsubishi/Syntec system, hollow screw, electrical cabinet air conditioner, 4-axis, 5-axis, column heightening, tool internal cooling, fixtures, clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Note ③: Optional 30-tool capacity for the tool magazine.
